Electric O-type ball valve
It is mainly used for cutting off or connecting media inside the pipeline and can be also used for adjusting and controlling the fluid; it is not only to switch flexibly the confluence, diffluence and flow direction of the media, but also can close any channel and connect the other two channels. With the features of compact structure, reliable sealing, simple structure and easy maintenance, it is suitable for water, solvents, hydrogen peroxide, natural gas, methane and other media. It is also widely used in oil and gas pipelines, refining cracking unit and nuclear industry.
    


 Main Technical Parameters     

Nominal diameters DN(mm)

15、20、25、32、40、50、65、80、100、125、150、175、200、250、300、400

Nominal pressure PN (MPa)

1.0、1.6、2.5、4.0、6.4、10.0、16.0 、20.0、25.0、32.0

Materials of valve body and valve bonnet

ZG230-450WCB

ZG1Cr18Ni9

ZG1Cr19Ni12Mo2

Materials of ball valve core

1Cr13HCr

1Cr18Ni9

1Cr18Ni12Mo2

Operating temperature t (℃)

-28~150

-28~250

-28~350

Ball core type

Whole ball, half ball, V ball

Connection type

Flange type

Flow characteristics

Quick opening characteristics, approximate equal percentage of V ball

Allowable leakage rate

Metal hard seal ClassV-VI Soft seal ClassVI or no leakage

※ Optional electric actuators

Integral type, switching value, remote control type, explosion-proof type, integral adjustable type, split control type, etc. (Please refer to the information of actuator for specific option)

※ Voltage of power supply

Domestic Standard: 220V +10-15% ~ 380V +10-10% (50Hz ± 1Hz, linear power supply) Exported product can be customized: 110V ~ 480V (50Hz ~ 60Hz)

※ Level of protection

IP55~IP68

※ Explosion-proof mark

Exd II BT4

Operation environment

Environmental temperature -10 ~ 70℃Humidity ≤ 95% No condensation Avoid corrosive gases in the air

             ※ some products can be selected according to conditions on site, if have any doubt, please contact our company.

 
DESIGN BY BENTANGTianjin JINDA actuatION co., LTD. Copyright © 2013 Tianjin ICP for 1200813 (1/3) 0